en
RAYTALK COMMUNICATIONS LTD.
RAYTALK COMMUNICATIONS LTD.
Is it normal the LED light on the battery box flahses after the battery is installed on the ANR Aviation headsets?

Yes, it's normal. The LED light is not always on.

Is there an amplifier board in the Bluetooth control box of the microphone?

No, if you want to add amplifier board, the MOQ is 1000 pieces, and we need to re-lay the board. We recommend to put the amplifier board in the ear cups.

Is the ANR module of PH-100AC-BT in the Bluetooth box or in the ear shell?

In the Bluetooth box.

Can you make PH-200A with active noise reduction?

Yes,we can,to change the in-line PTT on the ear cuo,and make battery box.But very few people want the ANR for ground support headset.

Does the inverter have anti-PID function?

Anti-PID function is an optional function for AUXSOL inverter, which is mainly used in high temperature and humidity areas, and rarely used in conventional projects.

How to change the mic of PH-400A-GA?

As the mic is fixed on the boom,so we can change it together with the whole boom.

The connector of PH-200A is PJ-051, what is the female plug of PJ-051?

SC-838 Female Connector.

How long the battery of PH-400A-GA/ANR/BT can be used, What kind of battery should be used in general? Do you have any recommendations?

The normal environment is about 12 hours. Generally, alkaline batteries are used, as long as they are good alkaline batteries.

However, in the case of high noise, the output power is large, and the battery life will be shortened. The greater the external noise, the faster the battery consumption.

Can we use your headset in high altitude and low temperature?

Sure, it can work in high altitude, but please ensure the temperature is -20­°C-65­°C.

Why it include two 3.5mm jack on control box from RayTalk PNR aviation headset?

They are just for optional, one can be connected with mobile, another could be connected with earpiece.

Could you supply ANR aviation headset for Kids?

Sure, we have kids style available.

What does S and R mean on the amplying PCB 206DG? Could it work at voltage 5V?

R mean MIC +, S means MIC.-;

Customer can have a try on 5V, but the standard voltage range is 8-32V.

As different device we're not sure the actual situation yet.